How to Use a Table Saw: You Should Know These 8 Steps.

Are you looking for the safest method of how to use a table saw? Well, you’re at the right place. We’ll guide you through the safest possible way…

If you have never used a table saw before, then you will definitely feel a bit nervous while using a table saw for the first time. The noise of the machine is quite deafening, and the motion of the blade can surely scare you.

But, following the right method of using a table saw can help you from all aspects.

Before we enter into the detailed explanation of how to use a table saw, you can take a look at the hybrid table saw reviews. Our comprehensive reviews of the best hybrid table saw will guide you to get the best saw.

And, only the best table saw can help you get the desired kind of result!

Now, let’s start our comprehensive guidelines about using a table saw in the safest way. Don’t skip any part or else you won’t get the precise training.

Let The Game Begins…

Safety of Table Saw

While using a table saw, the very first thing you should keep in mind is safety. It is quite shocking that saw injuries are quite common. If you don’t know the right way of using a table saw, then you may undoubtedly become a victim of any unexpected table saw injury.

Therefore, we always recommend using your table saw with the utmost care and safety. You may already feel a bit scared. But don’t you worry. We’re here to help you out.

Step 2 – Table Saw Parts:

parts of table saw

Here, you’ll come to know about all the parts of your table saw.

Table – This one doesn’t need a description at all.

Fence – This is quite a lengthy guide which is parallel to the table saw’s blade. The initial purpose of a fence is to keep your work at a certain distance from the machine’s blade when you’re doing a ripping cut.

Fence Dog – It is a kind of lever which actually locks the fence in place. To secure it in the right place, you have to press it down tightly.

Blade – Of course, this is the part which does all the cutting jobs. Well, currently you can find different kinds of blades in the market. But, we’ll discuss this in details later.

Blade Insert – It is normally an insert which works for filling the hole used for blade switching purpose. In the most common cases, you’ll see that blade inserts do have a 1/8 inches gap on both sides of the machine’s blade.

Blade-Height Adjustment Wheel – And the name says it all. This particular wheel will allow you to change the height of your machine’s blade.

Blade Angle Adjustment Lever – This wheel or lever, on the contrary, will allow you to adjust the blade-angle relative to the machine’s table. And, you will get an angle indicator with it.

Power Button – Most of the table saws come with “hinged” push-pull power buttons. You can turn your machine on by pulling the switch and turn off by pushing it.

Step 3 – Types of Cuts:

types of table saw cut

Usually, you can perform 3 different types of cuts with your table saw – a ripping cut, a cross-cut, and a dado cut.

Let’s get some more details about each variant:

Ripping Cut: A ripping cut is a kind of cut which goes all the way down the length of your board. You can adjust the fence as a guide for achieving the width you’re expecting.

Cross-Cut: Typically it is a cut which is across the grain. But, any kind of cut across the narrower path of your board is a cross-cut.

Dado Cut: A dado cut is a type of cut that is frequently used in joinery. You can use the fence or miter gauge for this cut.

Step 4 – The Blade Height:

Saw Blade Height

When you try to set the blade height, there are 2 different types of approaches available for you.

  • In the first approach, you’ll need to set the blade a bit higher (like 1/8 inches) than the top portion of the wood you have to work on. Well, the purpose of this approach is to be on the safe side. Even if you slip, it’s good news that you won’t get any kind of deep injury and this will certainly save the fingers.
  • And, in the second approach, you will have to set the machine’s blade above the top part of the wood piece. Applying this method will surely reduce fraying and tears.

Step 5 – Angled Cuts:

Angled cut

Most of the table saw models come with the features of performing 2 different types of angled cuts:

  • You can do the first cut by just setting the miter gauge since it is relative to your blade’s plane. In order to perform this kind of cut, you just need to set the miter gauge at your desired angle, and then, you are good to go.
  • And, the second cut, on the contrary, is relative to your table’s plane. You can do it just by tilting over the machine’s blade.

Step 6 – Fence Adjustment:

Fence Adjustment

You can easily adjust the fence by using the “fence dog” or lever. This will let you get the desired level of length-wise cut.

Step 7 – Changing Blades and Inserts:

Changing blades and inserts blade

Blades:

First of all, let’s have a look at the different kinds of blades:

Standard Blade: The standard blade for your table saw is 1/8” wide and 8-10” in diameter. Keep in mind that the best blades have carbide on the teeth. And, this will allow them to hold the sharpness for a more extended period.

Wobble Blade: Wobble blade is ideal for cutting works where the blade is slanted relative to your table’s plane.

Dado Blade: And, this particular blade is commonly used for precise and smooth notches and trenches in the workpiece.

Inserts:

Here, we’ll discuss some common types of inserts;

Standard Insert: This is the standard insert which usually comes with your table saw box. You can use this for cutting operations like cross-cuts and ripping cuts.

Wide Gap Insert: This particular insert will let you perform only the trenching cuts. And, you have to use it only with the dado blades.

Zero Clearance Insert: This sort of insert is ideal for vertical cross-cuts and ripping cuts.

Step 8 – Cutting:

table saw cutting

Well, the ripping cut and cross-cut are 2 of the most common types of cuts everyone prefers to do with a table saw.

Here’s a short and straightforward guideline for you:

Cross-Cut:

To perform a cross-cut, you need to take a measurement tool first and then mark on the exact positions of your workpiece while measuring it. You have to keep in mind that it is not a wise thing to use both the miter gauge and the fence at the same time. If you do so, it may cause dangerous binding.

Slowly and smoothly advance your workpiece through the machine’s blade. While doing so, you have to hold the board as tightly as you can.

When you’re done, make sure you have turned off your machine.

Ripping Cut:

First, you have to adjust the fence and the blade-height. Now, turn on your table saw and put the work-piece against the machine’s fence.

A serious note for you – never put extreme pressure while you keep the work-piece against the fence. This may cause inaccurate cuts.

Again, make sure you’ve turned off your machine after you’re done.

Frequently Asked Questions (FAQ):

1. How to use a table saw to cut angles?

Answer: Well, this is not a tough job at all. You can simply attach a jig-assembly to your table saw guide in order to perform different angles of cut with your saw.

2. How to use a circular saw as a table saw?

Answer: Well, you can easily convert your circular saw into a table saw. Even if you’re not a professional, you can easily convert a circular saw into a table at your home.

To know the detailed procedures, you can read our comprehensive article on how to convert a circular saw into a table saw.

Conclusion:

How to use a table saw – we believe that the answer to this question is now clearly explained in details. We hope that you have to know each and every detail of a table saw along with the safest way to use it.

With our detailed guidelines, you can use your table saw for your desired cutting operations with ease. But, always make sure to follow the appropriate safety measures because the table saw injuries are very dangerous.

However, if you have any other safety measures in your mind; you can share that with us also.

We’ll love to hear from you.

Adios!

Spread the love

Leave a Comment